Sinking airplanes

Questions about installing NL2000

Moderator: NL2000 Development Team

Post Reply
User avatar
JacekJ
Newbie
Newbie
Posts: 3
Joined: Thu Jan 01, 1970 2:00 am
Location: Warsaw; Poland

Sinking airplanes

Post by JacekJ » Thu Jul 29, 2004 2:28 pm

I have installed The Netherlands 2000 v. 2.91 into my FS2004. The scenery looks perfect but all aircraft are sinking on all airports. I checked and corrected all files according to information from FAQ.
No results. Only 30% of aircrafts is visible, the rest is hidden deep into the taxi ways, runways or aprons. What could be wrong with my FS? What should I do to correct it?

BTW.
I had exactly the same situation with 2.9 versions.

User avatar
bku
NL2000 Development Team
NL2000 Development Team
Posts: 414
Joined: Thu Jan 01, 1970 2:00 am
Location: Arusha - Tanzania
Contact:

Post by bku » Thu Jul 29, 2004 7:44 pm

Pls read the manual. You can find the solution for this "problem".

Mark the box NL2000 altitude in the feature panel.

Again, as said many time before, pls read the manual before you come with a "problem".
Member of the NL2000 team

User avatar
JacekJ
Newbie
Newbie
Posts: 3
Joined: Thu Jan 01, 1970 2:00 am
Location: Warsaw; Poland

Post by JacekJ » Fri Jul 30, 2004 10:17 am

If only life was so simple I wouldn’t disturb anybody with my problems, believe me.
I have read the manual and did all instruction given in it. The very first thing I did was marking the NL200 altitude box. No results. After quite a long time and after checking all Holland’s airports I discovered that problem arrives only in Amsterdam airport. The rest is OK.
Don’t be so fast in judging other people, please.
:oops:

User avatar
JacekJ
Newbie
Newbie
Posts: 3
Joined: Thu Jan 01, 1970 2:00 am
Location: Warsaw; Poland

Post by JacekJ » Fri Jul 30, 2004 3:14 pm

My problem with sinking airplanes on EHAM has just been solved. Everything is OK now.
Uffff.
The manual was not enough.
Many thanks for your help.
:D

User avatar
acuba290
Newbie
Newbie
Posts: 3
Joined: Thu Jan 01, 1970 2:00 am
Location: EETN

Post by acuba290 » Fri Jan 20, 2006 5:48 pm

Jacek, i have a same problem. How did you solved that?Please help :wink:

best regards

Dmitri

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests