Page 1 of 1
EHAM
Posted: Sun Oct 09, 2011 2:52 pm
by Franz
Dear designer team !
Congratulation to your very good scenery !
After reinstalling FS9 and Netherland 2000v3sp I have the problem (only at EHAM), that the wheels of my aircrafts, as soon as leaving the apron are sinking into the ground, dust is raising arround as if it is rolling over an open field. For some aircrafts (heavy) you can´t even taxi after a stop even with full power - and also not make a takeoff.
I have the same scenerys as before reinstallation - UTE, GE, ............ and (new) Global 2010
Dou you have any solution ?
Cheers
Franz
Posted: Tue Oct 11, 2011 4:49 pm
by phjoop
Franz,
did you enable the EHAM afcad in the featurepanel ?
Joop
NL2000team
Posted: Tue Oct 11, 2011 9:53 pm
by Franz
Hallo Joop !
Thanks for your answer !
Maby I´m to old or stupid, but I can´t find the AFCAD in the feature Panel ????
At the NL2000 EHAM butto I find - Use NL2000 EHAM White road markings, red safety lines, white tow lines, ......
but don´t find the AFCADs
On which page can I read it in the manual ?
Cheers
Franz
Posted: Wed Oct 12, 2011 11:43 am
by phjoop
Franz,
you are never to old or stupid, come on,
but check in the feature panel NL2000 EHAM and on the right side is "FS2004 EHAM multiuse runways".
enable this one and see if your problem is solved now
Joop
NL2000team
Posted: Wed Oct 12, 2011 1:14 pm
by Franz
Hi Joop !
Thanks for your comforting me !
Yes, the EHAM multiuse button was already activated, now I deactivated it, tried to fly and activated it again - with the same result !
Did I mention that I have NL2000v3se? Does this make any difference ?
Cheers
Franz
Posted: Fri Oct 14, 2011 10:05 am
by phjoop
Franz,
OK, so that is allright.
And version3 or version 3SE is the same for hat the airports are concerned. Only a different photoground scenery.
I read, that you also have UTE en Global.
Do you have the NL2000 items in the library a higher priority
then UTE and Global ?
When you disable ( not uninstall
) this items in the library , do you still have the same problem?
Joop
NL2000team
Posted: Fri Oct 14, 2011 11:52 am
by Franz
Hallo Joop !
Yes, I have deactivated first Global 2010 and later UTE - with the same effect!! - it seems that the NL EHAM scenery is 1 or 2 ft to high !
Cheers
Franz
Posted: Sat Oct 15, 2011 1:02 pm
by phjoop
Franz,
I still don't understand why you have the problem and others have not.
Do you use a program for extra AI traffic , such as MyTraffic , or other afcads of EHAM?
MyTraffic have own afcads .
Joop
NL2000team