EHAM elevation issues in P3d v4. 5

Ask questions about Schiphol (EHAM)

Moderator: NL2000 Development Team

Post Reply
Dale Moore
Newbie
Newbie
Posts: 1
Joined: Tue Feb 25, 2020 10:45 pm

EHAM elevation issues in P3d v4. 5

Post by Dale Moore » Tue Feb 25, 2020 11:08 pm

Hi all
I've been trying EHAM 5.01 in P3d v4.5 and have a problem with the runways and taxiways being roughly 10 feet higher than the rest of the scenery ADE shows the airport at - 11 ft which correlates to the same altitude as the scenery surrounding the runways and the default airport altitude.
Ive tried changing the scenery priority and removing the 3d and library files also disabling freemesh Europe. I've also installed the photo scenery in case there are any elevation corrections but everything I try makes no difference. I'm not sure if the version of EHAM is compatible with V4. 5 but I don't see why not. The airport looks well otherwise. Does anyone have any ideas?
Regards
Dale

User avatar
phjoop
NL2000 Development Team
NL2000 Development Team
Posts: 1485
Joined: Thu Jan 01, 1970 2:00 am
Location: Leek

Re: EHAM elevation issues in P3d v4. 5

Post by phjoop » Wed Feb 26, 2020 10:47 am

Hi Dale,
Is it possible, that you also are using the Amsterdam of FlyTampa? They have a put an altitude correction in P3Dv4/scenery/world/scenery.
Another possibility is that EHAM in ORBX vector is activated.
Joop NL2000team

User avatar
tonyc
Newbie
Newbie
Posts: 9
Joined: Thu Jan 01, 1970 2:00 am

Re: EHAM elevation issues in P3d v4. 5

Post by tonyc » Wed Mar 18, 2020 10:41 am

I have the same problem. I don't have Fly Tampa EHAM and there are no Netherlands airports at all shown in Orbx Vector folder!

What can we do?

User avatar
phjoop
NL2000 Development Team
NL2000 Development Team
Posts: 1485
Joined: Thu Jan 01, 1970 2:00 am
Location: Leek

Re: EHAM elevation issues in P3d v4. 5

Post by phjoop » Fri Mar 27, 2020 10:55 am

You are right. Version 4 is correc,t but something is changed in version 5. We are looking in to it
Joop NL2000 team

User avatar
phjoop
NL2000 Development Team
NL2000 Development Team
Posts: 1485
Joined: Thu Jan 01, 1970 2:00 am
Location: Leek

Re: EHAM elevation issues in P3d v4. 5

Post by phjoop » Sat Mar 28, 2020 1:42 pm

We did find the cause and will release an EHAM update in short time
Joop NL2000team

User avatar
tonyc
Newbie
Newbie
Posts: 9
Joined: Thu Jan 01, 1970 2:00 am

Re: EHAM elevation issues in P3d v4. 5

Post by tonyc » Sun Mar 29, 2020 4:04 pm

Thank you so much guys. Perhaps you can notify us when this is done.

Many thanks for all your hard work.

Tony

User avatar
phjoop
NL2000 Development Team
NL2000 Development Team
Posts: 1485
Joined: Thu Jan 01, 1970 2:00 am
Location: Leek

Re: EHAM elevation issues in P3d v4. 5

Post by phjoop » Wed Apr 01, 2020 10:54 am

We will announce the release, when it will be ready ,
Joop NL2000team

Greg Goodavish
Newbie
Newbie
Posts: 8
Joined: Tue May 05, 2020 4:24 am

Re: EHAM elevation issues in P3d v4. 5

Post by Greg Goodavish » Sun Jan 24, 2021 3:15 am

any update on fixing the elevation issue in P3DV4.5?

User avatar
phjoop
NL2000 Development Team
NL2000 Development Team
Posts: 1485
Joined: Thu Jan 01, 1970 2:00 am
Location: Leek

Re: EHAM elevation issues in P3d v4. 5

Post by phjoop » Sat Jul 10, 2021 12:25 pm

Sorry for the delay, but here will be an update at the end of july 2021 ,
Joop NL200team

Greg Goodavish
Newbie
Newbie
Posts: 8
Joined: Tue May 05, 2020 4:24 am

Re: EHAM elevation issues in P3d v4. 5

Post by Greg Goodavish » Tue Nov 02, 2021 5:36 am

I have the latest version of NL2000 and EHAM, 5.05. I use Prepar3D V4.5 Still having the elevation issues with all taxiways and runways, and even parking spots being elevated. I have attached a pic. I am not using any other scenery in this area.

Greg Goodavish
Newbie
Newbie
Posts: 8
Joined: Tue May 05, 2020 4:24 am

Re: EHAM elevation issues in P3d v4. 5

Post by Greg Goodavish » Tue Nov 02, 2021 5:37 am

I have the latest version of NL2000 and EHAM, 5.05. I use Prepar3D V4.5 Still having the elevation issues with all taxiways and runways, and even parking spots being elevated. I am not using any other scenery in this area.

User avatar
phjoop
NL2000 Development Team
NL2000 Development Team
Posts: 1485
Joined: Thu Jan 01, 1970 2:00 am
Location: Leek

Re: EHAM elevation issues in P3d v4. 5

Post by phjoop » Tue Nov 02, 2021 4:14 pm

Greg , I send you a private message
Joop NL2000team

Greg Goodavish
Newbie
Newbie
Posts: 8
Joined: Tue May 05, 2020 4:24 am

Re: EHAM elevation issues in P3d v4. 5

Post by Greg Goodavish » Mon Jan 10, 2022 9:36 am

Please see my private msg back to you. The suggested fix did not work. Also, if I wanted to get the FlyTampa EHAM, to avoid these issues, where can I find the installer V4.0.77 that you suggest to avoid issues with that scenery and NL2000 scenery?

User avatar
phjoop
NL2000 Development Team
NL2000 Development Team
Posts: 1485
Joined: Thu Jan 01, 1970 2:00 am
Location: Leek

Re: EHAM elevation issues in P3d v4. 5

Post by phjoop » Thu Jan 13, 2022 1:21 pm

There is only an installer v 4.011 . And I don't have a private message in 2022,
The suggested solution worked for me. But if you are going to use FlyTampa EHAM , just uninstall the NL2000 version of NL2000 or deactivate it in de P3D library
Joop NL2000team

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests