Page 1 of 1

EHAM elevation issues in P3d v4. 5

Posted: Tue Feb 25, 2020 11:08 pm
by Dale Moore
Hi all
I've been trying EHAM 5.01 in P3d v4.5 and have a problem with the runways and taxiways being roughly 10 feet higher than the rest of the scenery ADE shows the airport at - 11 ft which correlates to the same altitude as the scenery surrounding the runways and the default airport altitude.
Ive tried changing the scenery priority and removing the 3d and library files also disabling freemesh Europe. I've also installed the photo scenery in case there are any elevation corrections but everything I try makes no difference. I'm not sure if the version of EHAM is compatible with V4. 5 but I don't see why not. The airport looks well otherwise. Does anyone have any ideas?
Regards
Dale

Re: EHAM elevation issues in P3d v4. 5

Posted: Wed Feb 26, 2020 10:47 am
by phjoop
Hi Dale,
Is it possible, that you also are using the Amsterdam of FlyTampa? They have a put an altitude correction in P3Dv4/scenery/world/scenery.
Another possibility is that EHAM in ORBX vector is activated.
Joop NL2000team

Re: EHAM elevation issues in P3d v4. 5

Posted: Wed Mar 18, 2020 10:41 am
by tonyc
I have the same problem. I don't have Fly Tampa EHAM and there are no Netherlands airports at all shown in Orbx Vector folder!

What can we do?

Re: EHAM elevation issues in P3d v4. 5

Posted: Fri Mar 27, 2020 10:55 am
by phjoop
You are right. Version 4 is correc,t but something is changed in version 5. We are looking in to it
Joop NL2000 team

Re: EHAM elevation issues in P3d v4. 5

Posted: Sat Mar 28, 2020 1:42 pm
by phjoop
We did find the cause and will release an EHAM update in short time
Joop NL2000team

Re: EHAM elevation issues in P3d v4. 5

Posted: Sun Mar 29, 2020 4:04 pm
by tonyc
Thank you so much guys. Perhaps you can notify us when this is done.

Many thanks for all your hard work.

Tony

Re: EHAM elevation issues in P3d v4. 5

Posted: Wed Apr 01, 2020 10:54 am
by phjoop
We will announce the release, when it will be ready ,
Joop NL2000team

Re: EHAM elevation issues in P3d v4. 5

Posted: Sun Jan 24, 2021 3:15 am
by Greg Goodavish
any update on fixing the elevation issue in P3DV4.5?

Re: EHAM elevation issues in P3d v4. 5

Posted: Sat Jul 10, 2021 12:25 pm
by phjoop
Sorry for the delay, but here will be an update at the end of july 2021 ,
Joop NL200team

Re: EHAM elevation issues in P3d v4. 5

Posted: Tue Nov 02, 2021 5:36 am
by Greg Goodavish
I have the latest version of NL2000 and EHAM, 5.05. I use Prepar3D V4.5 Still having the elevation issues with all taxiways and runways, and even parking spots being elevated. I have attached a pic. I am not using any other scenery in this area.

Re: EHAM elevation issues in P3d v4. 5

Posted: Tue Nov 02, 2021 5:37 am
by Greg Goodavish
I have the latest version of NL2000 and EHAM, 5.05. I use Prepar3D V4.5 Still having the elevation issues with all taxiways and runways, and even parking spots being elevated. I am not using any other scenery in this area.

Re: EHAM elevation issues in P3d v4. 5

Posted: Tue Nov 02, 2021 4:14 pm
by phjoop
Greg , I send you a private message
Joop NL2000team

Re: EHAM elevation issues in P3d v4. 5

Posted: Mon Jan 10, 2022 9:36 am
by Greg Goodavish
Please see my private msg back to you. The suggested fix did not work. Also, if I wanted to get the FlyTampa EHAM, to avoid these issues, where can I find the installer V4.0.77 that you suggest to avoid issues with that scenery and NL2000 scenery?

Re: EHAM elevation issues in P3d v4. 5

Posted: Thu Jan 13, 2022 1:21 pm
by phjoop
There is only an installer v 4.011 . And I don't have a private message in 2022,
The suggested solution worked for me. But if you are going to use FlyTampa EHAM , just uninstall the NL2000 version of NL2000 or deactivate it in de P3D library
Joop NL2000team