Hello all,
That's my first message on this forum. I hope you will understand my bad English.
Few months ago I installed NL2000 without any problem.
After a problem with the PC, I format and install XP and various prog on C:\ and make a Backup with Norton Ghost.
I install FS9 on D:\ and after NL2000 but no scenery declarations appears. I do an uninstall and reinstall. (2 hours each) and same problem.
So, I use my Ghost fo the disk C:\ (It never saw any file from FS) and reinstall FS9 on D:\ and other planes and scenery. (45 Gb at this time). And when I want to reinstall NL2000 it says that NL2000 already exists. And naturally the uninstall is impossible.
I clean the registry with "Regseeker" and same message.
Where is the fuc..... file that makes that NL2000 already exista.
Thanks in advance for yous answers.
Why not a french forum for a so beautiful scenery.
Re-installation of NL2000
Moderator: NL2000 Development Team
-
- Newbie
- Posts: 5
- Joined: Thu Jan 01, 1970 2:00 am
- Location: Carouge (Genève - Switzerland)
- Mark Arends
- Site Admin
- Posts: 732
- Joined: Thu Jan 01, 1970 2:00 am
- Location: Rotterdam
- Contact:
-
- Newbie
- Posts: 5
- Joined: Thu Jan 01, 1970 2:00 am
- Location: Carouge (Genève - Switzerland)
Thanks for your answer,
I have renamed the file and I have the same message.
Here is a part of the scenery.cfg in ....applicatioin Data .....
[General]
Title=Décor d'environnement FS9
Description=FS9 Scenery Data
Clean_on_Exit=FALSE
[area.001]
Title=Relief par défaut
Texture_ID=1
Layer=1
Active=TRUE
Required=TRUE
Local=Scenery\World
Remote=
Title=NL2000 V3.0 3D
Local=D:\FS2004\SceneryDB\Hollande\nl2k_v3_3D
Remote=
Active=TRUE
Required=FALSE
Layer=115
[area.002]
Title=Décor par défaut
Local=Scenery\BASE
Layer=2
Active=TRUE
Required=TRUE
Remote=
Title=NL2000 V3.0 mesh & photoreal 4.7 m/pixel
Local=D:\FS2004\SceneryDB\Hollande\nl2k_v3_resample
Remote=
Active=TRUE
Required=FALSE
Layer=116
[area.003]
Title=Afrique
Layer=3
Active=TRUE
Required=FALSE
Local=Scenery\Afri
Remote=
Title=NL2000 V3.0 photoreal 1m/pixel
Local=D:\FS2004\SceneryDB\Hollande\nl2k_v3_scasm
Remote=
Active=TRUE
Required=FALSE
Layer=117
[area.004]
Title=Asie
Layer=4
Active=TRUE
Required=FALSE
Local=Scenery\Asia
Remote=
Title=NL2000 V3.0 education
Local=D:\FS2004\SceneryDB\Hollande\nl2k_v3_education
Remote=
Active=FALSE
Required=FALSE
Layer=118
[area.005]
Title=Australie
Layer=5
Active=TRUE
Required=FALSE
Local=Scenery\Aust
Remote=
Title=NL2000 V3.0 night scenery
Local=D:\FS2004\SceneryDB\Hollande\nl2k_v3_night
Remote=
Active=FALSE
Required=FALSE
Layer=119
Very strange ??????
I have renamed the file and also put it on another disk without success.
What can I do ????
Thanks in advance.
I have renamed the file and I have the same message.
Here is a part of the scenery.cfg in ....applicatioin Data .....
[General]
Title=Décor d'environnement FS9
Description=FS9 Scenery Data
Clean_on_Exit=FALSE
[area.001]
Title=Relief par défaut
Texture_ID=1
Layer=1
Active=TRUE
Required=TRUE
Local=Scenery\World
Remote=
Title=NL2000 V3.0 3D
Local=D:\FS2004\SceneryDB\Hollande\nl2k_v3_3D
Remote=
Active=TRUE
Required=FALSE
Layer=115
[area.002]
Title=Décor par défaut
Local=Scenery\BASE
Layer=2
Active=TRUE
Required=TRUE
Remote=
Title=NL2000 V3.0 mesh & photoreal 4.7 m/pixel
Local=D:\FS2004\SceneryDB\Hollande\nl2k_v3_resample
Remote=
Active=TRUE
Required=FALSE
Layer=116
[area.003]
Title=Afrique
Layer=3
Active=TRUE
Required=FALSE
Local=Scenery\Afri
Remote=
Title=NL2000 V3.0 photoreal 1m/pixel
Local=D:\FS2004\SceneryDB\Hollande\nl2k_v3_scasm
Remote=
Active=TRUE
Required=FALSE
Layer=117
[area.004]
Title=Asie
Layer=4
Active=TRUE
Required=FALSE
Local=Scenery\Asia
Remote=
Title=NL2000 V3.0 education
Local=D:\FS2004\SceneryDB\Hollande\nl2k_v3_education
Remote=
Active=FALSE
Required=FALSE
Layer=118
[area.005]
Title=Australie
Layer=5
Active=TRUE
Required=FALSE
Local=Scenery\Aust
Remote=
Title=NL2000 V3.0 night scenery
Local=D:\FS2004\SceneryDB\Hollande\nl2k_v3_night
Remote=
Active=FALSE
Required=FALSE
Layer=119
Very strange ??????
I have renamed the file and also put it on another disk without success.
What can I do ????
Thanks in advance.
-
- Newbie
- Posts: 5
- Joined: Thu Jan 01, 1970 2:00 am
- Location: Carouge (Genève - Switzerland)
- Mark Arends
- Site Admin
- Posts: 732
- Joined: Thu Jan 01, 1970 2:00 am
- Location: Rotterdam
- Contact:
-
- Newbie
- Posts: 5
- Joined: Thu Jan 01, 1970 2:00 am
- Location: Carouge (Genève - Switzerland)
Who is online
Users browsing this forum: No registered users and 1 guest